HomeFAQ
Home FAQ
Frequently Asked Questions

Efficiently productivate reliable paradigms before ubiquitous models. Continually utilize frictionless expertise whereas tactical relationships. Still have questions? Contact us

How do they come 3 or 4 together?
They can come in either 1 by themselves or 2, 3 or 4 together they have been designed to join each other.
Can they supply large V8 Motors
Yes they can supply large 620 Horse Power motors and more as we manufacture and flow test them we can make them flow a lot higher than standard.
Are there different size hose connectors available?
Yes 10mm, 12, 14 and 16.
Can ends be swapped on them like a plug or feed tube?
Yes.
What if one injector is faulty missing or leaking?
Try Opening the Injector a 2mm pin punch to push out mount pins and cleaning the injector as deposits from oil in gas may be building up in areas and decreasing flow and or stuck on seal and or seat when assembling pins use a 3mm pin punch and apply small amount of silicon on end of small diameter of pins then insert to housing again LPGas can vary from country to country and dirty fuel can cause issues on injectors as they are finely tuned and pulsate inside the injector millions of times at a small travel distance.
Can the injectors be dismantled to be cleaned?
Yes they can.
Are the injectors available with temperature sensors?
Yes they are.
Are the injectors available with different size nozzles to assist tuning?
Yes in different color nozzles represent different size holes for flow variation.
Are replacement O-rings available for the injectors?
Yes.
Is each injector flow tested?
Yes.
Are they compact and easy to install?
Yes and rubber vibration mounts are available to mount onto the mount lugs on the injector.
What is the warranty period?
3 Years.